Mining & Mineral Processing

coagulants

Aluminum Chlorohydrate (ACH)

CAS: 12042-91-0

Ultra-high basicity aluminum coagulant (83–90% basicity) for premium drinking water treatment. Minimal pH impact and lowest sludge production among aluminum coagulants.

coagulants

Aluminum Sulfate (Non-Ferric Grade)

CAS: 10043-01-3

Non-ferric aluminum sulfate for drinking water treatment and paper sizing. Low iron content prevents color contamination in sensitive applications.

coagulants

Ferric Chloride Anhydrous

CAS: 7705-08-0

Anhydrous ferric chloride (FeCl3 ≥ 98%) for high-strength wastewater coagulation, sludge conditioning and PCB etching. Strong oxidizing coagulant with excellent heavy metal co-precipitation.

coagulants

Ferric Chloride Solution 40%

CAS: 7705-08-0

40% ferric chloride solution for direct dosing in water and wastewater treatment. No dissolution needed — pump directly from storage to dosing point.

coagulants

Ferrous Sulfate Heptahydrate

CAS: 7782-63-0

Ferrous sulfate heptahydrate for wastewater treatment, chromium reduction and phosphorus removal. Also used as iron supplement in agriculture and water treatment.

coagulants

Poly Ferric Chloride (PFC)

CAS: 1007-234-8

Polymeric iron chloride coagulant combining fast floc formation with strong phosphorus removal. Preferred for municipal wastewater requiring simultaneous P removal.

coagulants

Poly Ferric Sulfate (PFS)

CAS: 10028-22-5

Iron-based polymeric coagulant with superior color and COD removal. Effective in cold water and low-alkalinity conditions where aluminum coagulants underperform.

coagulants

Polyaluminum Chloride (PAC) 30% — Industrial Grade

CAS: 1327-41-9

High-basicity PAC with 30% Al2O3 content for industrial wastewater coagulation. Spray-dried powder with excellent turbidity removal and rapid floc formation.

coagulants

Polyaluminum Chloride (PAC) — Drinking Water Grade

CAS: 1327-41-9

High-purity PAC (28–30% Al2O3) with ultra-low heavy metal content for drinking water treatment. Meets GB 15892 and NSF/ANSI 60 standards.

coagulants

Sodium Aluminate

CAS: 11138-49-1

Alkaline coagulant for low-alkalinity water treatment and sludge conditioning. Raises pH while coagulating — eliminates need for separate lime addition.

defoamers

Defoamer for Desulfurization (FGD)

Specialized defoamer for flue gas desulfurization (FGD) limestone slurry systems. Prevents foam overflow in absorber towers and improves SO2 removal efficiency.

defoamers

High-Temperature Defoamer

Silicone-polyether hybrid defoamer stable up to 150°C for high-temperature industrial processes — sugar evaporation, black liquor processing, high-temperature dyeing.