Textile & Dyeing
Decolorants, flocculants and coagulants for high-colour textile effluent treatment, plus pH adjusters for dye bath water management.
Key Industry Challenges
Related Product Categories
Featured Products
coagulants
Aluminum Chlorohydrate (ACH)
CAS: 12042-91-0
Ultra-high basicity aluminum coagulant (83–90% basicity) for premium drinking water treatment. Minimal pH impact and lowest sludge production among aluminum coagulants.
View Details →coagulants
Aluminum Sulfate (Non-Ferric Grade)
CAS: 10043-01-3
Non-ferric aluminum sulfate for drinking water treatment and paper sizing. Low iron content prevents color contamination in sensitive applications.
View Details →coagulants
Ferric Chloride Anhydrous
CAS: 7705-08-0
Anhydrous ferric chloride (FeCl3 ≥ 98%) for high-strength wastewater coagulation, sludge conditioning and PCB etching. Strong oxidizing coagulant with excellent heavy metal co-precipitation.
View Details →coagulants
Ferric Chloride Solution 40%
CAS: 7705-08-0
40% ferric chloride solution for direct dosing in water and wastewater treatment. No dissolution needed — pump directly from storage to dosing point.
View Details →coagulants
Ferrous Sulfate Heptahydrate
CAS: 7782-63-0
Ferrous sulfate heptahydrate for wastewater treatment, chromium reduction and phosphorus removal. Also used as iron supplement in agriculture and water treatment.
View Details →coagulants
Poly Ferric Chloride (PFC)
CAS: 1007-234-8
Polymeric iron chloride coagulant combining fast floc formation with strong phosphorus removal. Preferred for municipal wastewater requiring simultaneous P removal.
View Details →coagulants
Poly Ferric Sulfate (PFS)
CAS: 10028-22-5
Iron-based polymeric coagulant with superior color and COD removal. Effective in cold water and low-alkalinity conditions where aluminum coagulants underperform.
View Details →coagulants
Polyaluminum Chloride (PAC) 30% — Industrial Grade
CAS: 1327-41-9
High-basicity PAC with 30% Al2O3 content for industrial wastewater coagulation. Spray-dried powder with excellent turbidity removal and rapid floc formation.
View Details →coagulants
Polyaluminum Chloride (PAC) — Drinking Water Grade
CAS: 1327-41-9
High-purity PAC (28–30% Al2O3) with ultra-low heavy metal content for drinking water treatment. Meets GB 15892 and NSF/ANSI 60 standards.
View Details →coagulants
Sodium Aluminate
CAS: 11138-49-1
Alkaline coagulant for low-alkalinity water treatment and sludge conditioning. Raises pH while coagulating — eliminates need for separate lime addition.
View Details →decolorants
Decolorant for Textile Wastewater
CAS: 55295-98-2
Dicyandiamide-formaldehyde polycondensate for reactive and direct dye removal from textile wastewater. High charge density for effective color neutralization.
View Details →decolorants
Ferrous Sulfate Decolorant
CAS: 7782-63-0
Low-cost iron-based decolorant for acid dye and direct dye wastewater. Combines coagulation with Fenton-like oxidative decolorization at acidic pH.
View Details →Can't find what you need?
Tell us your application requirements and we'll help source the right chemical additives for your formulation.
Send Inquiry